10. Standards
The following list shows you a compilation of standards related to vibration measurement.
Notice: DIN ISO and DIN EN ISO is found under ISO
Number / Source | Title |
ANSI S2.1 | Vibration and Shock – Vocabulary |
ANSI S2.2 | Methods for the Calibration of Shock and Vibration Pickups |
ANSI S2.4 | Method for Specifying the Characteristics of Auxiliary Analog Equipment for Shock and Vibration Measurements |
ANSI S2.7 | Balancing Terminology |
ANSI S2.13 | Mechanical Vibration of Non-Reciprocating Machines – Measurements on Rotating Shafts and Evaluation Part 1: General Guidelines |
ANSI S2.16 | Vibration Noise Measurements and Acceptance Criteria of Shipboard Equipment |
ANSI S2.17 | Machinery Vibration Measurement |
ANSI S2.19 | Mechanical Vibration – Balance Quality Requirements of Rigid Rotors Part 1: Determination of Permissible Residual Unbalance |
ANSI S2.25 | Guide for the Measurement, Reporting, and Evaluation of Hull and Superstructure Vibration in Ships |
ANSI S2.26 | Vibration Testing Requirements and Acceptance Criteria for Shipboard Equipment |
ANSI S2.28 | Guide for the Measurement and Evaluation of Vibration of Shipboard Machinery |
ANSI S2.29 | Guide for the Measurement and Evaluation of Vibration of Machine Shafts on Shipboard Machinery |
ANSI S2.40 | Mechanical Vibration of Rotating and Reciprocating Machinery – Requirements for Instruments for Measuring Vibration Severity |
ANSI S2.41 | Mechanical Vibration of Large Rotating Machines with Speed Range from 10 to 200 rev/s – Measurement and Evaluation of Mechanical Vibration Severity in situ |
ANSI S2.42 | Procedures for Balancing of Flexible Rotors |
ANSI S2.43 | Criteria for Evaluating Flexible Rotor Balance |
ANSI S2.45 | Electrodynamic Test Equipment for Generating Vibration – Method of Describing Equipment Characteristics |
ANSI S2.46 | Characteristics to be Specified for Seismic Transducers |
ANSI S2.47 | Vibration of Buildings – Guidelines for the Measurement of Vibrations and Evaluation of Their Effects on Buildings |
ANSI S2.48 | Servo-Hydraulic Test Equipment for Generating Vibration – Methods of Describing Characteristics |
ANSI S2.58 | Auxiliary Tables for Vibration Generators – Methods of Describing Equipment Characteristics |
ANSI S2.61 | Guide to the Mechanical Mounting of Accelerometers |
ANSI S2.70 | Guide for the Measurement and Evaluation of Human Exposure to Vibration Transmitted to the Hand |
ANSI S2.73 | Mechanical Vibration and Shock–Hand-arm Vibration–Method for the Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand |
ANSI S3.18 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration (ISO 2631) |
ANSI S3.29 | Guide to the Evaluation of Human Exposure to Vibration in Buildings |
ANSI S3.32 | Mechanical Vibration and Shock Affecting Man – Vocabulary |
ANSI S3.34 | Human Exposure to Vibration Transmitted to the Hand, Guide for Measurement and Evaluation of |
ANSI S3.40 | Mechanical Vibration and Shock – Hand-Arm Vibration – Method for the Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand (ISO 10819) |
ANSI S12.11 | Acoustics – Measurement of noise and vibration of small air-moving devices – Part 2: Structure-borne vibration |
ANSI/AGMA 6000-B96 | Specification for Measurement of Linear Vibration on Gear Units |
ANSI/ASHRAE 87.1 | Method of Testing Fan Vibration–Blade Vibrations and Critical Speeds |
ANSI/ASHRAE 87.3 | Methods of Testing Propeller Fan Vibration—-Diagnostic Test Methods |
ARI 530-95 | Method of Rating Sound and Vibration of Refrigerant Compressors |
AS 1359.114 | Rotating electrical machines – General requirements – Vibration measurements and limits (IEC 34-14) |
AS 1807.17 AS 1807.18 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators – Methods of test Part 17: Determination of vibration in cleanrooms Part 18: Determination of vibration in workstations, safety cabinets and pharmaceutical isolators |
AS 2362.15 | Fire detection, warning, control and intercom systems – Methods of test – Vibration test |
AS 2400.10 | Packaging – Protection against shock and vibration (cushioning) |
AS 2582.6 AS 2582.11 | Complete, filled transport packages – Methods of test Part 6: Vibration test at fixed low frequency Part 11: Sinusoidal vibration tests using a variable frequency |
AS 2606 | Vibration and shock – Vocabulary (ISO 2041) |
AS 2625.1 AS 2625.4 | Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts (ISO 10816) Part 1: General guidelines Part 4: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ |
AS 2641 | Vibration and shock – Balancing – Vocabulary (ISO 1925) |
AS 2670.1 AS 2670.2 AS 2670.4 | Evaluation of human exposure to whole-body vibration (ISO 2631) Part 1: General requirements Part 2: Continuous and shock-induced vibration in buildings (1 to 80Hz) Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems |
AS 2763 | Vibration and shock – Hand-transmitted vibration – Guidelines for measurement and assessment of human exposure |
AS 2775 | Mechanical vibration and shock – Mechanical mounting of accelerometers (ISO 5348) |
AS 2955 | Earth-moving machinery – Tests and measurements – Operator seat – Transmitted vibration |
AS 2973 | Vibration and shock – Human response vibration-measuring instrumentation |
AS 2993 | Vibration and shock – Dynamic characteristics of the human body – Driving point impedance of the human body |
AS 3658 | Vibration and shock – Mechanical vibration and shock affecting humans – Vocabulary (ISO 5805) |
AS 3709 | Vibration and shock – Balance quality of rotating rigid bodies (ISO 1940-1) |
AS 3721 | Vibration and shock – Balancing machines – Description and evaluation (ISO 2953) |
AS 3728 | Vibration and shock – Resilient shaft couplings – Information to be supplied by users and manufacturers |
AS 3762 | Measurement and reporting of local vibration data of ship structures and equipment (ISO 4868) |
AS 3763 | Mechanical vibration and shock – Guidelines for the overall evaluation of vibration in merchant ships (ISO 20283-5) |
AS 3764 | The measurement and reporting of shipboard vibration data (ISO 4867) |
AS 4594.5 | Internal combustion engines – Performance – Engines for land, rail-traction and marine use – Torsional vibrations (ISO 3046) |
ASTM D999-01 | Standard Methods for Vibration Testing of Shipping Containers |
ASTM D3580-95 | Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products |
ASTM D4728-01 | Standard Test Method for Random Vibration Testing of Shipping Containers |
ASTM D5112-98 | Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products |
ASTM D6874-03 | Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration |
BS 5228-1 BS 5228-2 | Code of practice for noise and vibration control on construction and open sites Part 1: Noise Part 2: Vibration |
BS 6472-1 BS 6472-2 | Guide to evaluation of human exposure to vibration in buildings |
BS 6611 | Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz) |
BS 6841 | Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock |
BS 7085 | Guide to safety aspects of experiments in which people are exposed to mechanical vibration and shock |
BS 7385-2 | Evaluation and measurement for vibration in buildings |
CR 1030-1 CR 1030-2 | Hand-arm vibration – Guidelines for vibration hazards reduction Part 1: Engineering methods by design of machinery , Part 2: Management measures at the workplace |
CR 12349 | Mechanical vibration – Guide to the health effects of vibration on the human body |
D5112-98 | Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products |
D3580-95 | Standard Test Methods for vibration (Vertical Linear Motion) Test of Products |
DIN 1311-1 DIN 1311-2 DIN 1311-3 DIN 1311-4 | (Mechanical) vibrations, oscillation and vibration systems Part 1: Basic concepts, survey Part 2: Linear vibration systems with single degree of freedom Part 3: Linear time-invariant vibration systems with a finite number of degrees of freedom Part 4: Vibration; vibrating continua, waves |
DIN 3979 | Tooth Damage on Gear Trains; Designation, Characteristics, Causes |
DIN 4150-1 DIN 4150-2 DIN 4150-3 | Vibrations in buildings Part 1: Predictions of vibration parameters Part 2: Human exposure to vibration in buildings Part 3: Effects on structures |
DIN 4178 | Belltowers |
DIN 5426-1 | Rolling bearings – Rolling bearing vibration and noise – Part 1: Methods for measurement of structure-borne noise |
DIN 25475-2 | Nuclear facilities – Operational monitoring Part 2: Vibration monitoring for early detection of changes in the vibrational behavior of the primary coolant circuit in pressurized water reactors |
DIN 30787-6 | Transportation loads – Measurement and evaluation of dynamic mechanical loads Part 6: Automatic recording systems for measuring random shock while monitoring transports |
DIN 31692-3 | DIN 31692-3 Vibration monitoring of plain bearings |
DIN 45635-8 | Determination of airborne noise emitted by machines by, measurement of structure borne noise; basic requirements |
DIN 45661 | Vibration measuring instrumentation – Vocabulary |
DIN 45662 | Vibration measuring instrumentation – Fundamental requirements and verification |
DIN 45667 | Classification methods for evaluation of random vibrations |
DIN 45669-1 DIN 45669-2 | Measurement of vibration immissions Part 1: Vibration meters – Requirements and tests Part 2: Measuring method |
DIN 45672-1 DIN 45672-2 | Vibration measurement associated with railway traffic systems Part 1: Measuring method for vibration Part 2: Evaluation method |
DIN 45673-1 DIN 45673-2 | Resilient elements used in railway tracks Part 1: Terms and definitions, classification, test procedures Part 2: Determination of static and dynamic characteristics in the track under operation |
DIN 45678 | Mechanical vibration – Articulated trucks – Laboratory method for evaluating vehicle seat vibration |
DIN 45679 | Mechanical vibration – Measurement and evaluation of coupling forces for assessment of vibration exposure of the hand-arm system |
DIN 45694 | Mechanical vibration – Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery |
DIN 45695 | Hand-arm vibration – Guidelines for vibration hazards reduction – Engineering and management measures (CR 1030-1 + CR 1030-2) |
DIN 50100 | Load controlled fatigue testing – Execution and evaluation of cyclic tests at constant load amplitudes on metallic specimens and components |
DIN 52210 | Testing of acoustics in buildings – Airborne and impact sound insulation – Determination of the level difference by shafts |
DIN 70003 | Vibrational stress; measurement of parameters on vehicle parts |
EN 1032 | Mechanical vibration – Testing of mobile machinery in order to determine the vibration emission value |
EN 1177 | Impact attenuating playground surfacing – Methods of test for determination of impact attenuation |
EN 1299 | Mechanical vibration and shock – Vibration isolation of machines – Information for the application of source isolation |
EN 12096 | Mechanical vibration – Declaration and verification of vibration emission values |
EN 12503-4 | Gymnastic mats – Part 4: Determination of shock absorption |
EN 12786 | Safety of machinery – Requirements for the drafting of the vibration clauses of safety standards |
EN 13059 | Safety of industrial trucks – Test methods for measuring vibration |
EN 13490 | Mechanical vibration – Industrial trucks – Laboratory evaluation and specification of operator seat vibration |
EN 14253 | Mechanical vibration – Measurement and calculation of occupational exposure to whole-body vibration with reference to health – Practical guidance |
EN 30326 | Mechanical vibration – Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements (ISO 10326-1) |
EN 60068-2-64 | Environmental testing – Part 2-64: Tests – Test Fh: Vibration, broadband random and guidance |
EN 60255-21-3 | Electrical relays (IEC 60255) Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment; section 3: Seismic tests |
EN 60512-6-4 EN 60512-6-5 | EN 60512-6-4▹ Connectors for electronic equipment – Tests and measurements (IEC 60512) Part 6-4: Dynamic stress tests; Test 6d: Vibration (sinusoidal) Part5: Test 6e: Vibration, noise (DIN EN 60512) |
EN 60745 | Hand-held motor-operated electric tools – Safety Part 1: General requirements (IEC 60745-1:2006, modified) Part 2-1: Particular requirements for drills and impact drills Part 2-2: Particular requirements for screwdrivers and impact wrenches Part 2-3: Particular requirements for grinders, polishers and disk-type sanders Part 2-4: Particular requirements for sanders and polishers other than disk type Part 2-5: Particular requirements for circular saws Part 2-6: Particular requirements for hammers Part 2-8: Particular requirements for shears and nibblers Part 2-9: Particular requirements for tappers Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) Particular requirements for concrete vibrators Part 2-13: Particular requirements for chain saws Part 2-14: Particular requirements for planers Part 2-15: Particular requirements for hedge trimmers Part 2-17: Particular requirements for routers and trimmers Part 2-18: Particular requirements for strapping tools Part 2-19: Particular requirements for jointers Part 2-20: Particular requirements for band saws Part 2-21: Particular requirements for hand-held drain cleaners |
EN 60994 | Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) (IEC 60994) |
EN 61373 | Railway applications – Rolling stock equipment – Shock and vibration tests (IEC 61373:2010) |
ENV 25349 | Mechanical vibration – Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration (ISO 5349) |
DIN ENV 28041 | Human response to vibration – Measuring instrumentation (DIN EN ISO 8041) |
GB 10068-2000 | Mechanical vibration of certain machines with shaft heights 56 mm and higher–Measurement,evaluation and limits of vibration |
GB 10070 | Standard of environmental vibration in urban area |
GB 10434 | Hygienic standard for hand-transmitted vibration in the work environment |
GB 4869 | Diagnostic criteria and principles of management of occupational vibration disease |
GB/T 10071 | Measurement method of environmental vibration of urban area |
GB/T 10084 | Vibration and shock–methods for analysis and presentation of data |
GB/T 10283 | Portable pneumatic extinguishers–Measurement of hand-transmitted vibration |
GB/T 10397 | Small and medium power engines-Evaluation of vibration |
GB/T 10593.3 | Methods of measuring environmental parameters for electric and electronic products–Treatment and induction for the vibration data |
GB/T 10895 | Centrifuge and separator-Measurement method of mechanical vibration |
GB/T 10910 | Agricultural wheeled tractors and fieled machinery-Measurement of whole-body vibration of the operator |
GB/T 11287 | Electrical relays–Part 21: Vibration,shock,bump and seismic tests on measuring relays and protection equipment |
GB/T 11348.1 GB/T 11348.2 GB/T 11348.3 GB/T 11348.4 GB/T 11348.5 | Mechanical vibration of non-reciprocating machines–Measurements on rotating shafts and evaluation criteria Part 1: General guidelines Part 2: Large land-based steam turbine generator sets Part 3: Coupled industrial machines Part 4: Gas turbine sets Part 5: Machine sets in hydraulic power generating and pumping plants |
GB/T 11706 | Measurement method of vibration for marine engine room auxiliaries |
GB/T 13364 | Measurement of mechanical vibration for reciprocating pump |
GB/T 13436 | Technical requirements for torsional vibration measuring instruments |
GB/T 13441 | Specification for measurement of human exposure to whole-body vibration environment |
GB/T 13442 | Reduced comfort boundary and evaluation criteria for human exposure to whole-body vibration |
GB/T 13670 | Mechanical vibration–Measurement and analysis of vibration to which passengers and crew are exposed in railway vehicles |
GB/T 13823.1 GB/T 13823.2 GB/T 13823.3 GB/T 13823.4 GB/T 13823.5 GB/T 13823.6 GB/T 13823.7 GB/T 13823.8 GB/T 13823.9 GB/T 13823.10 GB/T 13823.11 GB/T 13823.12 GB/T 13823.13 GB/T 13823.14 GB/T 13823.15 GB/T 13823.16 GB/T 13823.17 GB/T 13823.18 | Methods for the calibration of vibration and shock pick-ups Part 1: Basic concepts Part 2: Primary vibration calibration by laser interferometry Part 3: Comparison(secondary vibration)calibration by sinusoidal excitation Part 4: Testing of magnetic field sensitivity Part 5: Testing of mounting torque sensitivity Part 6: Testing of base strain sensitivity Part 7: Primary vibration calibration by comparison of phase angles Part 8: Testing of transverse vibration sensitivity Part 9: Testing of transverse shock sensitivity Part 10: Methods for the calibration of vibration and shock pick-ups–Secondary shock calibration Part 11: Primary vibration calibration by laser interferometry at low frequencies Part 12: Resonance frequency testing of undamped accelerometers on a steel block Part 13: Primary shock calibration by light cutting Part 14: Primary calibration by centrifuge Part 15: Testing of transient temperature sensitivity Part 16: Testing of temperature response by comparison Part 17: Testing of acoustic sensitivity Part 18: Primary vibration calibration by reciprocity method |
GB/T 13824 | Requirements for instruments for measuring vibration severity |
GB/T 13860 | Mechanical vibrations–Land vehicles-Method for reporting measured data |
GB/T 13866 | Shock and vibration measurements–Characteristics to be specified for seismic pick-ups |
GB/T 13876 | Evaluation criteria of whole body vibration of the operator |
GB/T 14124 | Mechanical vibration and shock–Measurement and evaluation of vibration effects on buildings–Guidelines for the use of basic standard methods |
GB/T 14125 | Vibration and shock sensitive equipment–Methods of measurement and reporting data of vibration and shock effects in buildings |
GB/T 14179 | Brush saws–Measurements of hand-transmitted vibration |
GB/T 14412 | Mechanical vibration and shock–Mechanical mounting of accelerometers |
GB/T 14696 | Code for the measurement of ship vibration |
GB/T 14697 | Code for the measurement of local vibration of ship |
GB/T 14790 | Methods for the measurement and the assessment of human exposure to hand-transmitted vibration |
GB/T 15619 | Terminology for human exposure to mechanical vibration and shock |
GB/T 16301 | Evaluation of vibration severity for marine engine-room auxiliaries |
GB/T 16440 | Vibration and shock–Mechanical driving point impedance of the human body |
GB/T 16441 | Vibration and shock–Mechanical transmissibility of the human body in the z direction |
GB/T 16539 | Determination of sound power levels of noise sources using vibration velocity–Measurement for seal machinery |
GB/T 16768 | Metal-cutting machine tools–Measurement method for vibration |
GB/T 16908 | Mechanical vibration–Balancing–Shaft and fitment key convention |
GB/T 17046 | Vibratory rollers Parts The evaluation to exposure mechanical vibration |
GB/T 17189 | Code for field measurement of vibrations and pulsations in hydraulic machines |
GB/T 17958 | Requirements for vibration hazards reduction of hand-held machines at the workplace |
GB/T 18051 | Tests of electric submersible pump system vibration |
GB/T 18368 | Comfort evaluation of human exposure to whole-body vibration in recumbent position |
GB/T 18703 | Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand |
GB/T 18707.1 | Mechanical vibration–Laboratory method for evaluating vehicle seat vibration–Part 1: Basic requirements |
GB/T 2298 | Mechanical vibration and shock-Terminology |
GB/T 2414.1 GB/T 2414.2 | Test methods for the properties of piezoelectric ceramics Part 1: Radial extension vibration mode for disk Part 2: Transverse length extension vibration mode for bar |
GB/T 2423.10 GB/T 2423.11 GB/T 2423.12 GB/T 2423.14 GB/T 2423.42 GB/T 2423.43 GB/T 2423.47 GB/T 2423.48 GB/T 2423.49 | Environmental testing for electric and electronic products–Part 2: Test methods Part 10: Test Fc and guidance: Vibration (Sinusoidal) Part 11: Test Fd: Random vibration wide band Part 12: Test Fda: Random vibration wide band–Reproducibility high Part 14: Test Fdc: Random vibration wide band–Reproducibility low Part 42: Combined low temperature/low air pressure / vibration (sinusoidal) test Part 43: Mounting of components, equipment and other articles for dynamic tests including shock(Ea), bump(Eb), vibration(Fc and Fd) and steady-state acceleration(Ca) Part 47: Test Fg: Vibration, acoustically induced Part 48: Test Ff:Vibration–Time-history method Part 49: Test Fe: Vibration–sine-beat method |
GB/T 3389.4 GB/T 3389.5 GB/T 3389.6 | Test methods for the properties of piezoelectric ceramics Part 4: Longitudinal length extension vibration mode for rod Part 5: Thickness extension vibration mode for disk Part 6 Thickness-shear vibration mode for rectangular plate: |
GB/T 4451 | Methods of vibration (sinusoidal) test for use in industrial process measurement and control instrument |
GB/T 4857.10 | Packaging–Transport packages–Sinusoidal vibration test method using a variable vibration frequency |
GB/T 4857.7 | Packaging–Transport packages–Sinusoidal vibration test method at constant frequency |
GB/T 5170.13 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products–Mechanical vibrating type machines for vibration (sinusoidal ) test |
GB/T 5170.15 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products–Hydraulic vibrating type machines for vibration |
GB/T 5395 | Portable chain saws-Measurement of hand-transmitted vibration |
GB/T 5913 | Mechanical vibration of machines and equipments in diesel locomotive Evaluation of vibration severity in site |
GB/T 6444 | Mechanical vibration–Balancing vocabulary |
GB/T 6587.4 | Vibration tests for electronic measuring instruments |
GB/T 7031 | Vehicle vibration–Describing method for road surface irregularity |
GB/T 7183 | Evaluation of mechanical vibration severity of machines and equipments in electric locomotives |
GB/T 7184 | Measurement method of vibration for small and medium power diesel engines |
GB/T 7452.1 | Guidelines for the overall evaluation of vibration in merchant ships |
GB/T 7452.2 | Guidelines for the overall evaluation of vibration in merchant ships under 100m |
GB/T 7453 | Measurement of ship vibration |
GB/T 8543 | Determination of mechanical vibrations of gear units during acceptance testing |
IBM | IBM® Standards Authority for Vibration and Shock, classes of vibration environments |
IEC 60034-14 | Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher – Measurement, evaluation and limits of vibration severity |
IEC 60255-21 | Electrical relays Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment; section 3: Seismic tests |
IEC 60512-6-4 IEC 60512-6-5 | Connectors for electronic equipment – Tests and measurement (DIN EN 60255-21-3) Part 6-4: Dynamic stress tests; Test 6d: Vibration (sinusoidal) Part5: Test 6e: Vibration, noise (DIN EN 60512) |
IEC 60721-2-6 | Classification of environmental conditions Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock |
IEC 60745 | Hand-held motor-operated electric tools – Safety |
IEC 60749-12 | Semiconductor devices – Mechanical and climatic test methods Part 12: Vibration, variable frequency |
IEC 60994 | Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) |
IEC 61300-2-1 | Fibre optic interconnecting devices and passive components – Basic test and measurement procedures Part 2-1: Tests – Vibration (sinusoidal) (DIN IEC 61300-2-1) |
IEC 61373 | Railway applications – Rolling stock equipment – Shock and vibration tests (DIN EN 61373) |
IEC 61502 | Nuclear power plants – Pressurized water reactors – Vibration monitoring of internal structures |
IEEE 344 | IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations |
IEEE 1451.4 | IEEE Standard for A Smart Transducer Interface for Sensors and Actuators–Mixed-Mode Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats |
ISA-RP37.2 | Guide for Specifications and Tests for Piezoelectric Acceleration Transducers for Aerospace Testing |
ISO 140 | Acoustics — Measurement of sound insulation in buildings and of building elements |
ISO 1925 | Mechanical vibration — Balancing — Vocabulary |
ISO 1940-1 ISO 1940-2 | Mechanical vibration – Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances Part 2: Balance errors |
ISO 2017 | Mechanical vibration and shock – Resilient mounting systems |
ISO 2041 | Mechanical vibration, shock and condition monitoring – Vocabulary |
ISO 2247 | Packaging – Complete, filled transport packages and unit loads – Vibration tests at fixed low frequenc |
ISO 2371 | withdrawn |
ISO 2372 | withdrawn, replaced by ISO 20816-1 |
ISO 2373 | withdrawn |
ISO 2631-1 ISO 2631-2 ISO 2631-4 ISO 2631-5 | Mechanical vibration and shock – Evaluation of human exposure to whole-body vibration Part 1: General requirements Part 2: Vibration in buildings (1 Hz to 80 Hz) Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems Part 5: Method for evaluation of vibration containing multiple shocks |
ISO 2671 | Environmental tests for aircraft equipment Part 3.4 : Acoustic vibration |
ISO 2953 | Mechanical vibration – Rotor balancing – Part 21: Description and evaluation of balancing machines |
ISO 2954 | Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity |
ISO 4866 | Mechanical vibration and shock – Vibration of fixed structures – Guidelines for the measurement of vibrations and evaluation of their effects on structures |
ISO 4867 | Code for the measurement and reporting of shipboard vibration data |
ISO 4868 | Code for the measurement and reporting of local vibration data of ship structures and equipment |
ISO 5007 | Agricultural wheeled tractors – Operators seat – Laboratory measurement of transmitted vibration |
ISO 5008 | Agricultural wheeled tractors and field machinery – Measurement of whole-body vibration of the operator |
ISO 5344 | Electrodynamic vibration generating systems – Performance characteristics |
ISO 5347-8 ISO 5347-12 ISO 5347-13 ISO 5347-15 ISO 5347-16 ISO 5347-18 ISO 5347-22 | Methods for the calibration of vibration and shock pick-ups Part 8: Primary calibration by dual centrifuge Part 12: Testing of transverse shock sensitivity Part 13: Testing of base strain sensitivity Part 15: Testing of acoustic sensitivity Part 16: Testing of mounting torque sensitivity Part 18: Testing of transient temperature sensitivity Part 22: Accelerometer resonance testing – General methods |
ISO 5348 | Mechanical vibration and shock – Mechanical mounting of accelerometers |
ISO 5349-1 ISO 5349-2 | Mechanical vibration – Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements Part 2: Practical guidance for measurement at the workplace |
ISO 5805 | Mechanical vibration and shock – Human exposure – Vocabulary |
ISO 5982 | Mechanical vibration and shock – Range of idealized values to characterize human biodynamic response under whole-body vibration |
ISO 6070 | Auxiliary tables for vibration generators – Methods of describing equipment characteristics |
ISO 6721 | Plastics – Determination of dynamic mechanical properties |
ISO 6897 | Guidelines for the evaluation of the response of occupants of fixed structures, especially buildings and off-shore structures, to low-frequency horizontal motion (0,063 to 1 Hz) |
ISO 6954 | Mechanical vibration — Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships (withdrawn, replaced by ISO 20283-5) |
ISO 7096 | Earth-moving machinery – Laboratory evaluation of operator seat vibration |
ISO 7626-1 ISO 7626-2 ISO 7626-5 | Mechanical vibration and shock – Experimental determination of mechanical mobility Part 1: Basic terms and definitions, and transducer specifications Part 2: Measurements using single-point translation excitation with an attached vibration exciter Part 5: Measurements using impact excitation with an exciter which is not attached to the structure |
ISO/TR 7849 | Acoustics – Determination of airborne sound power levels emitted by machinery using vibration measurement |
ISO 7919-2 | Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
ISO 8002 | Mechanical vibrations — Land vehicles — Method for reporting measured data |
ISO 8041-1 ISO 8041-2 | Human response to vibration — Measuring instrumentation Part 1: General purpose vibration meters Part 2: Personal vibration exposure meters |
ISO 8042 | Characteristics to be specified for seismic pick-ups |
ISO 8568 | Mechanical shock – Testing machines – Characteristics and performance |
ISO 8528-9 | Reciprocating internal combustion engine driven alternating current generating sets – Part 9: Measurement and evaluation of mechanical vibrations |
ISO 8608 | Mechanical vibration – Road surface profiles – Reporting of measured data |
ISO 8626 | Servo-hydraulic test equipment for generating vibration – Method of describing characteristics |
ISO 8727 | Mechanical vibration and shock – Human exposure – Biodynamic coordinate systems |
ISO 9688 | Mechanical vibration and shock – Analytical methods of assessing shock resistance of mechanical systems – Information exchange between suppliers and users of analyses |
ISO 9996 | Mechanical vibration and shock – Disturbance to human activity and performance – Classification |
ISO 10055 | Mechanical vibration – Vibration testing requirements for shipboard equipment and machinery components |
ISO 10068 | Mechanical vibration and shock – Mechanical impedance of the human hand-arm system at the driving point |
ISO 10326-1 ISO 10326-2 | Mechanical vibration – Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements Part 2: Application to railway vehicles |
ISO/TS 10811-1 ISO/TS 10811-2 | Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment Part 1: Measurement and evaluation Part 2: Classification |
ISO 10813-1 | Vibration generating machines — Guidance for selection Part 1: Equipment for environmental testing |
ISO 10815 | Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains |
ISO 10816-6 ISO 10816-7 ISO 10816-21 | Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts Part 6: Reciprocating machines with power ratings above 100 kW Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts Part 21: Horizontal axis wind turbines with gearbox |
ISO 10817-1 | Rotating shaft vibration measuring systems Part 1: Relative and absolute sensing of radial |
ISO 10819 | Mechanical vibration and shock – Hand-arm vibration – Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand |
ISO 10846-1 ISO 10846-2 ISO 10846-3 ISO 10846-4 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements Part 1: Principles and guidelines Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
ISO 13090-1 | Mechanical vibration and shock — Guidance on safety aspects of tests and experiments with people Part 1: Exposure to whole-body mechanical vibration and repeated shock |
ISO 13091-1 ISO 13091-2 | Mechanical vibration – Vibrotactile perception thresholds for the assessment of nerve dysfunction Part 1: Methods of measurement at the fingertips Part 2: Analysis and interpretation of measurements at the fingertips |
ISO 13332 | Reciprocating internal combustion engines – Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet |
ISO 13350 | Fans — Performance testing of jet fans |
ISO 13355 | Packaging — Complete, filled transport packages and unit loads — Vertical random vibration test |
ISO 13373-1 ISO 13373-2 ISO 13373-3 ISO 13373-4 ISO 13373-5 ISO 13373-7 ISO 13373-9 | Condition monitoring and diagnostics of machines – Vibration condition monitoring Part 1: General guidelines Part 2: Processing, analysis and presentation of vibration data Part 3: Guidelines for vibration diagnosis Part 4: Diagnostic techniques for gas and steam turbines with fluid-film bearings Part 5: Diagnostic techniques for fans and blowers Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants Part 9: Diagnostic techniques for electric motors |
DIN EN ISO 13753 | Mechanical vibration and shock – Hand-arm vibration – Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system |
ISO 14694 | Industrial fans — Specifications for balance quality and vibration levels |
ISO 14695 | Industrial fans — Method of measurement of fan vibration |
ISO 14839-1 ISO 14839-2 ISO 14839-3 ISO 14839-4 ISO 14839-5 | Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings Part 1: Vocabulary Part 2: Evaluation of vibration Part 3: Evaluation of stability margin Part 4: Technical guidelines Part 5: Touch-down bearings |
ISO 14963 | Mechanical vibration and shock – Guidelines for dynamic tests and investigations on bridges and viaducts |
ISO 15242-1 ISO 15242-2 ISO 15242-3 ISO15242-4 | Rolling bearings – Measuring methods for vibration Part 1: Fundamentals Part 2: Radial ball bearings with cylindrical bore and outside surface Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface |
ISO 15243 | Rolling bearings – Damage and failures – Terms, characteristics and causes |
ISO/TS 15694 | Mechanical vibration and shock — Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system |
ISO 16063-1 ISO 16063-11 ISO 16063-12 ISO 16063-13 ISO 16063-15 ISO 16063-16 ISO 16063-17 ISO 16063-21 ISO 16063-22 ISO 16063-31 ISO 16063-32 ISO 16063-33 ISO 16063-34 ISO 16063-41 ISO 16063-42 ISO 16063-43 ISO 16063-44 ISO 16063-45 | Methods for the calibration of vibration and shock transducers Part 1: Basic concepts Part 11: Primary vibration calibration by laser interferometry Part 12: Primary vibration calibration by the reciprocity method Part 13: Primary shock calibration using laser interferometry Part 15: Primary angular vibration calibration by laser interferometry Part 16: Calibration by Earth’s gravitation Part 17: Primary calibration by centrifuge Part 21: Vibration calibration by comparison to a reference transducer Part 22: Shock calibration by comparison to a reference transducer Part 31: Testing of transverse vibration sensitivity Part 32: Resonance testing – Testing the frequency and the phase response of accelerometers by means of shock excitation Part 33: Testing of magnetic field sensitivity Part 34: Testing of sensitivity at fixed temperatures Part 41: Calibration of laser vibrometers Part 42: Calibration of seismometers with high accuracy using acceleration of gravity Part 43: Calibration of accelerometers by model-based parameter identification Part 44: Calibration of field vibration calibrators Part 45: In-situ calibration of transducers with built in calibration coil |
ISO 18431-1 ISO 18431-2 ISO 18431-3 ISO 18431-4 | Mechanical vibration and shock – Signal processing Part 1: General introduction Part 2: Time domain windows for Fourier Transform analysis Part 3: Methods of time-frequency analysis Part 4: Shock-response spectrum analysis |
ISO 18436-1 ISO 18436-2 | Condition monitoring and diagnostics of machine systems – Requirements for certification of personnel Part 1: Sector specific requirements for certification bodies and the certification process Part 2: Vibration condition monitoring and diagnostics |
ISO 18649 | Mechanical vibration – Evaluation of measurement results from dynamic tests and investigations on bridges |
ISO/TR 19664 | Human response to vibration – Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety |
ISO 20283-2 ISO 20283-3 ISO 20283-4 ISO 20283-5 | Mechanical vibration – Measurement of vibration on ships Part 2: Measurement of structural vibration Part 3: Pre-installation vibration measurement of shipboard equipment Part 4: Measurement and evaluation of vibration of the ship propulsion machinery Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships |
ISO 20643 | Mechanical vibration – Hand-held and hand-guided machinery – Principles for evaluation of vibration emission |
ISO 20816-1 ISO 20816-2 ISO 20816-3 ISO 20816-4 ISO 20816-5 ISO 20816-8 ISO 20816-9 | Mechanical vibration – Measurement and evaluation of machine vibration Part 1: General guidelines Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min Part 3: Industrial machinery with a power rating above 15 kW and operating speeds between 120 r/min and 30 000 r/min Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings Part 5: Machine sets in hydraulic power generating and pump-storage plants Part 8: Reciprocating compressor systems Part 9: Gear units |
ISO 22867 | Forestry and gardening machinery – Vibration test code for portable hand-held machines with internal combustion engine – Vibration at the handles |
JIS B 0906 | Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – General guidelines |
JIS B 0907 | Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity |
JIS B 0910 | Mechanical vibration of non-reciprocating machines – Measurements on rotating shafts and evaluation criteria |
JIS B 0911 | Mechanical vibration – Susceptibility and sensitivity of machines to unbalance |
JIS B 1754 | Acceptance code for gears Part 2: Determination of mechanical vibrations of gear units during acceptance testing |
JIS C 1510 | Vibration level meters |
JIS C 1512 | Level recorders for recording sound level and/or vibration level |
JIS D 1601 | Vibration testing methods for automobile parts |
JIS E 3014 | Parts for railway signal – Vibration test methods |
JIS E 4023 | Vibration characteristics of railway rolling stock – Measuring methods |
JIS E 4031 | Railway rolling stock parts – Test methods for vibration |
JIS Z 0232 | Packaged freights – Method of vibration test |
JIS Z 8735 | Methods of measurement for vibration level |
MIL-A-8870C | Airplane Strength and Rigidity Vibration, Flutter, and Divergence |
MIL-STD-167 | Mechanical Vibrations On Ship Board Systems |
MIL-STD-167/1 | Mechanical Vibrations of Shipboard Equipment (Type I – Environmental and Type II – Internally Excited) |
MIL-STD-167/2 | MIL-STD-167/2 Mechanical Vibrations of Shipboard Equipment (Reciprocating Machinery and Propulsion System and Shafting) Types III, IV, and V |
MIL-STD-202G | Test Method 201A: Vibration |
MIL-STD-202G | Test Method 204D: Vibration, High Frequency |
MIL-STD-202G | Test Method 214A: Random Vibration |
MIL-STD-810F | Test Method Standard For Environmental Engineering |
NEMA MG1 | Assists users in the proper selection and application of motors and generators. |
PD 6585-2 | Hand-arm vibration. Guidelines for vibration hazards reduction. Management measures at the workplace |
SN 640312a | Effects of vibrations on buildings |
UIC 513 | Guidelines for evaluating passenger comfort in relation to vibration in railway vehicles |
UNI 9916 | Criteria for the measurements of vibrations and the assessment of their effects on buildings |
UNI 9942 | Methods for measurement of vibrations generated internally of railways tunnels |
VDI 2038-1 VDI 2038-2 VDI 2038-3 | Serviceability of structures under dynamic loads – Methods of analysis and evaluation in structural dynamics Part 1: Basics, methods, procedures and loads Part 2: Shock and vibration – prognosis, measurement, evaluation and reduction measures Part 3: Secondary airborne sound – prognosis, measurement, evaluation and reduction measures |
VDI 2057-1 VDI 2057-2 VDI 2057-3 | Human exposure to mechanical vibrations Part 1: Whole-body vibration Part 2: Hand-arm vibration Part 3: Whole-body vibration at workplaces in buildings |
VDI 2062-1 VDI 2062-2 | Vibration insulation Part 1: Terms and methods Part 2: Insulation elements |
VDI 2064 | Active vibration isolation |
VDI 2149 | Transmission dynamics – Elastic mechanisms |
VDI 3831 | Protective measures against vibration effects on man |
VDI 3832 | Measurement of structure-borne sound of rolling element bearings in machines and plants for evaluation of condition |
VDI 3833-1 VDI 3833-2 | Dynamic damper and dynamic vibration absorber Part 1: Dynamic damper – Fundamentals, characteristics, implementation, application Part 2: Dynamic vibration absorber and dynamic vibration absorption |
VDI 3834-1 VDI 3834-2 | Measurement and evaluation of the mechanical vibration of wind turbines and their components Part 1: Wind turbines with gearbox Part 2: Wind turbines without gearbox |
VDI 3836 | Measurement and evaluation of mechanical vibration of screw-type compressors and Root blowers |
VDI 3837 | Ground-borne vibration in the vicinity of at-grade rail systems – Spectral prediction method |
VDI 3838 | Measurement and evaluation of mechanical vibration of reciprocating piston engines and piston compressors with power ratings above 100 kW |
VDI 3839-1 VDI 3839-2 VDI 3839-4 VDI 3839-5 VDI 3839-6 VDI 3839-7 VDI 3839-8 | Instructions on measuring and interpreting the vibrations of machines Part 1: General principles Part 2: Vibration patterns for excitation arising from unbalance, incorrect assembly, bearing faults and damage to rotating components Part 4: Typical vibration patterns with fans and blowers for gases Part 5: Typical vibration patterns with electrical machines Part 6: Typical vibration patterns with machine sets in hydraulic power stations Part 7: Typical vibration patterns with centrifugal pumps Part 8: Typical vibration patterns with reciprocating machines |
VDI 3840 | Vibration analysis for machine sets |
VDI 3842 | Vibrations in piping systems |