{"id":6056,"date":"2023-08-10T18:37:26","date_gmt":"2023-08-10T18:37:26","guid":{"rendered":"https:\/\/mmf.de\/?p=6056"},"modified":"2024-03-05T14:12:47","modified_gmt":"2024-03-05T14:12:47","slug":"standards","status":"publish","type":"post","link":"https:\/\/mmf.de\/en\/standards\/","title":{"rendered":"10. Standards"},"content":{"rendered":"

The following list shows you a compilation of standards related to vibration measurement.<\/p>

Notice: DIN ISO and DIN EN ISO is found under ISO<\/a><\/p>

Number \/ Source<\/strong><\/td>Title<\/strong><\/td><\/tr>
ANSI S2.1<\/a><\/td>Vibration and Shock – Vocabulary<\/td><\/tr>
ANSI S2.2<\/a><\/td>Methods for the Calibration of Shock and Vibration Pickups<\/td><\/tr>
ANSI S2.4<\/a><\/td>Method for Specifying the Characteristics of Auxiliary Analog Equipment for Shock and Vibration Measurements<\/td><\/tr>
ANSI S2.7<\/a><\/td>Balancing Terminology<\/td><\/tr>
ANSI S2.13<\/a><\/td>Mechanical Vibration of Non-Reciprocating Machines – Measurements on Rotating Shafts and EvaluationPart 1: General Guidelines<\/td><\/tr>
ANSI S2.16<\/a><\/td>Vibration Noise Measurements and Acceptance Criteria of Shipboard Equipment<\/td><\/tr>
ANSI S2.17<\/a><\/td>Machinery Vibration Measurement<\/td><\/tr>
ANSI S2.19<\/a><\/td>Mechanical Vibration – Balance Quality Requirements of Rigid RotorsPart 1: Determination of Permissible Residual Unbalance<\/td><\/tr>
ANSI S2.25<\/a><\/td>Guide for the Measurement, Reporting, and Evaluation of Hull and Superstructure Vibration in Ships<\/td><\/tr>
ANSI S2.26<\/a><\/td>Vibration Testing Requirements and Acceptance Criteria for Shipboard Equipment<\/td><\/tr>
ANSI S2.28<\/a><\/td>Guide for the Measurement and Evaluation of Vibration of Shipboard Machinery<\/td><\/tr>
ANSI S2.29<\/a><\/td>Guide for the Measurement and Evaluation of Vibration of Machine Shafts on Shipboard Machinery<\/td><\/tr>
ANSI S2.40<\/a><\/td>Mechanical Vibration of Rotating and Reciprocating Machinery – Requirements for Instruments for Measuring Vibration Severity<\/td><\/tr>
ANSI S2.41<\/a><\/td>Mechanical Vibration of Large Rotating Machines with Speed Range from 10 to 200 rev\/s – Measurement and Evaluation of Mechanical Vibration Severity in situ<\/td><\/tr>
ANSI S2.42<\/a><\/td>Procedures for Balancing of Flexible Rotors<\/td><\/tr>
ANSI S2.43<\/a><\/td>Criteria for Evaluating Flexible Rotor Balance<\/td><\/tr>
ANSI S2.45<\/a><\/td>Electrodynamic Test Equipment for Generating Vibration – Method of Describing Equipment Characteristics<\/td><\/tr>
ANSI S2.46<\/a><\/td>Characteristics to be Specified for Seismic Transducers<\/td><\/tr>
ANSI S2.47<\/a><\/td>Vibration of Buildings – Guidelines for the Measurement of Vibrations and Evaluation of Their Effects on Buildings<\/td><\/tr>
ANSI S2.48<\/a><\/td>Servo-Hydraulic Test Equipment for Generating Vibration – Methods of Describing Characteristics<\/td><\/tr>
ANSI S2.58<\/a><\/td>Auxiliary Tables for Vibration Generators – Methods of Describing Equipment Characteristics<\/td><\/tr>
ANSI S2.61<\/a><\/td>Guide to the Mechanical Mounting of Accelerometers<\/td><\/tr>
ANSI S2.70<\/a><\/td>Guide for the Measurement and Evaluation of Human Exposure to Vibration Transmitted to the Hand<\/td><\/tr>
ANSI S2.73<\/a><\/td>Mechanical Vibration and Shock\u2013Hand-arm Vibration\u2013Method for the Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand<\/td><\/tr>
ANSI S3.18<\/a><\/td>Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration (ISO 2631<\/a>)<\/td><\/tr>
ANSI S3.29<\/a><\/td>Guide to the Evaluation of Human Exposure to Vibration in Buildings<\/td><\/tr>
ANSI S3.32<\/a><\/td>Mechanical Vibration and Shock Affecting Man – Vocabulary<\/td><\/tr>
ANSI S3.34<\/a><\/td>Human Exposure to Vibration Transmitted to the Hand, Guide for Measurement and Evaluation of<\/td><\/tr>
ANSI S3.40<\/a><\/td>Mechanical Vibration and Shock – Hand-Arm Vibration – Method for the Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand (ISO 10819<\/a>)<\/td><\/tr>
ANSI S12.11<\/a><\/td>Acoustics – Measurement of noise and vibration of small air-moving devices – Part 2: Structure-borne vibration<\/td><\/tr>
ANSI\/AGMA 6000-B96<\/a><\/td>Specification for Measurement of Linear Vibration on Gear Units<\/td><\/tr>
ANSI\/ASHRAE 87.1<\/a><\/td>Method of Testing Fan Vibration–Blade Vibrations and Critical Speeds<\/td><\/tr>
ANSI\/ASHRAE 87.3<\/a><\/td>Methods of Testing Propeller Fan Vibration—-Diagnostic Test Methods<\/td><\/tr>
ARI 530-95<\/a><\/td>Method of Rating Sound and Vibration of Refrigerant Compressors<\/td><\/tr>
AS 1359.114<\/a><\/td>Rotating electrical machines – General requirements – Vibration measurements and limits (IEC 34-14)<\/td><\/tr>
AS 1807.17<\/a>AS 1807.18<\/a><\/td>Cleanrooms, workstations, safety cabinets and pharmaceutical isolators – Methods of testPart 17: Determination of vibration in cleanroomsPart 18: Determination of vibration in workstations, safety cabinets and pharmaceutical isolators<\/td><\/tr>
AS 2362.15<\/a><\/td>Fire detection, warning, control and intercom systems – Methods of test – Vibration test<\/td><\/tr>
AS 2400.10<\/a><\/td>Packaging – Protection against shock and vibration (cushioning)<\/td><\/tr>
AS 2582.6<\/a>AS 2582.11<\/a><\/td>Complete, filled transport packages – Methods of testPart 6: Vibration test at fixed low frequencyPart 11: Sinusoidal vibration tests using a variable frequency<\/td><\/tr>
AS 2606<\/a><\/td>Vibration and shock – Vocabulary (ISO 2041)<\/td><\/tr>
AS 2625.1<\/a>AS 2625.4<\/a><\/td>Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts (ISO 10816)Part 1: General guidelinesPart 4: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r\/min and 15 000 r\/min when measured in situ<\/td><\/tr>
AS 2641<\/a><\/td>Vibration and shock – Balancing – Vocabulary (ISO 1925)<\/td><\/tr>
AS 2670.1<\/a>AS 2670.2<\/a>AS 2670.4<\/a><\/td>Evaluation of human exposure to whole-body vibration (ISO 2631)Part 1: General requirementsPart 2: Continuous and shock-induced vibration in buildings (1 to 80Hz)Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems<\/td><\/tr>
AS 2763<\/a><\/td>Vibration and shock – Hand-transmitted vibration – Guidelines for measurement and assessment of human exposure<\/td><\/tr>
AS 2775<\/a><\/td>Mechanical vibration and shock – Mechanical mounting of accelerometers (ISO 5348)<\/td><\/tr>
AS 2955<\/a><\/td>Earth-moving machinery – Tests and measurements – Operator seat – Transmitted vibration<\/td><\/tr>
AS 2973<\/a><\/td>Vibration and shock – Human response vibration-measuring instrumentation<\/td><\/tr>
AS 2993<\/a><\/td>Vibration and shock – Dynamic characteristics of the human body – Driving point impedance of the human body<\/td><\/tr>
AS 3658<\/a><\/td>Vibration and shock – Mechanical vibration and shock affecting humans – Vocabulary (ISO 5805)<\/td><\/tr>
AS 3709<\/a><\/td>Vibration and shock – Balance quality of rotating rigid bodies (ISO 1940-1)<\/td><\/tr>
AS 3721<\/a><\/td>Vibration and shock – Balancing machines – Description and evaluation (ISO 2953)<\/td><\/tr>
AS 3728<\/a><\/td>Vibration and shock – Resilient shaft couplings – Information to be supplied by users and manufacturers<\/td><\/tr>
AS 3762<\/a><\/td>Measurement and reporting of local vibration data of ship structures and equipment (ISO 4868)<\/td><\/tr>
AS 3763<\/a><\/td>Mechanical vibration and shock – Guidelines for the overall evaluation of vibration in merchant ships (ISO 20283-5)<\/td><\/tr>
AS 3764<\/a><\/td>The measurement and reporting of shipboard vibration data (ISO 4867)<\/td><\/tr>
AS 4594.5<\/a><\/td>Internal combustion engines – Performance – Engines for land, rail-traction and marine use – Torsional vibrations (ISO 3046)<\/td><\/tr>
ASTM D999-01<\/a><\/td>Standard Methods for Vibration Testing of Shipping Containers<\/td><\/tr>
ASTM D3580-95<\/a><\/td>Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products<\/td><\/tr>
ASTM D4728-01<\/a><\/td>Standard Test Method for Random Vibration Testing of Shipping Containers<\/td><\/tr>
ASTM D5112-98<\/a><\/td>Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products<\/td><\/tr>
ASTM D6874-03<\/a><\/td>Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration<\/td><\/tr>
BS 5228-1<\/a>BS 5228-2<\/a><\/td>Code of practice for noise and vibration control on construction and open sitesPart 1: NoisePart 2: Vibration<\/td><\/tr>
BS 6472-1<\/a>BS 6472-2<\/a><\/td>Guide to evaluation of human exposure to vibration in buildings<\/td><\/tr>
BS 6611<\/a><\/td>Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz)<\/td><\/tr>
BS 6841<\/a><\/td>Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock<\/td><\/tr>
BS 7085<\/a><\/td>Guide to safety aspects of experiments in which people are exposed to mechanical vibration and shock<\/td><\/tr>
BS 7385-2<\/a><\/td>Evaluation and measurement for vibration in buildings <\/td><\/tr>
CR 1030-1<\/a>CR 1030-2<\/a><\/td>Hand-arm vibration – Guidelines for vibration hazards reductionPart 1: Engineering methods by design of machinery , Part 2: Management measures at the workplace<\/td><\/tr>
CR 12349<\/a><\/td>Mechanical vibration – Guide to the health effects of vibration on the human body<\/td><\/tr>
D5112-98<\/a><\/td>Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products<\/td><\/tr>
D3580-95<\/a><\/td>Standard Test Methods for vibration (Vertical Linear Motion) Test of Products<\/td><\/tr>
DIN 1311-1DIN 1311-2DIN 1311-3DIN 1311-4<\/a><\/td>(Mechanical) vibrations, oscillation and vibration systemsPart 1: Basic concepts, surveyPart 2: Linear vibration systems with single degree of freedomPart 3: Linear time-invariant vibration systems with a finite number of degrees of freedomPart 4: Vibration; vibrating continua, waves<\/td><\/tr>
DIN 3979<\/a><\/td>Tooth Damage on Gear Trains; Designation, Characteristics, Causes<\/td><\/tr>
DIN 4150-1<\/a>DIN 4150-2<\/a>DIN 4150-3<\/a><\/td>Vibrations in buildingsPart 1: Predictions of vibration parametersPart 2: Human exposure to vibration in buildingsPart 3: Effects on structures<\/td><\/tr>
DIN 4178<\/a><\/td>Belltowers<\/td><\/tr>
DIN 5426-1<\/a><\/td>Rolling bearings – Rolling bearing vibration and noise – Part 1: Methods for measurement of structure-borne noise<\/td><\/tr>
DIN 25475-2<\/a><\/td>Nuclear facilities – Operational monitoringPart 2: Vibration monitoring for early detection of changes in the vibrational behavior of the primary coolant circuit in pressurized water reactors<\/td><\/tr>
DIN 30787-6<\/a><\/td>Transportation loads – Measurement and evaluation of dynamic mechanical loadsPart 6: Automatic recording systems for measuring random shock while monitoring transports<\/td><\/tr>
DIN 31692-3<\/a><\/td>DIN 31692-3 Vibration monitoring of plain bearings<\/td><\/tr>
DIN 45635-8<\/a><\/td>Determination of airborne noise emitted by machines by, measurement of structure borne noise; basic requirements<\/td><\/tr>
DIN 45661<\/a><\/td>Vibration measuring instrumentation – Vocabulary<\/td><\/tr>
DIN 45662<\/a><\/td>Vibration measuring instrumentation – Fundamental requirements and verification<\/td><\/tr>
DIN 45667<\/a><\/td>Classification methods for evaluation of random vibrations<\/td><\/tr>
DIN 45669-1DIN 45669-2<\/a><\/td>Measurement of vibration immissionsPart 1: Vibration meters – Requirements and testsPart 2: Measuring method<\/td><\/tr>
DIN 45672-1DIN 45672-2<\/a><\/td>Vibration measurement associated with railway traffic systemsPart 1: Measuring method for vibrationPart 2: Evaluation method<\/td><\/tr>
DIN 45673-1DIN 45673-2<\/a><\/td>Resilient elements used in railway tracksPart 1: Terms and definitions, classification, test proceduresPart 2: Determination of static and dynamic characteristics in the track under operation<\/td><\/tr>
DIN 45678<\/a><\/td>Mechanical vibration – Articulated trucks – Laboratory method for evaluating vehicle seat vibration<\/td><\/tr>
DIN 45679<\/a><\/td>Mechanical vibration – Measurement and evaluation of coupling forces for assessment of vibration exposure of the hand-arm system<\/td><\/tr>
DIN 45694<\/a><\/td>Mechanical vibration – Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery<\/td><\/tr>
DIN 45695<\/a><\/td>Hand-arm vibration – Guidelines for vibration hazards reduction – Engineering and management measures (CR 1030-1<\/a> + CR 1030-2<\/a>)<\/td><\/tr>
DIN 50100<\/a><\/td>Load controlled fatigue testing – Execution and evaluation of cyclic tests at constant load amplitudes on metallic specimens and components<\/td><\/tr>
DIN 52210<\/a><\/td>Testing of acoustics in buildings – Airborne and impact sound insulation – Determination of the level difference by shafts<\/td><\/tr>
DIN 70003<\/a><\/td>Vibrational stress; measurement of parameters on vehicle parts<\/td><\/tr>
EN 1032<\/a><\/td>Mechanical vibration – Testing of mobile machinery in order to determine the vibration emission value<\/td><\/tr>
EN 1177<\/a><\/td>Impact attenuating playground surfacing – Methods of test for determination of impact attenuation<\/td><\/tr>
EN 1299<\/a><\/td>Mechanical vibration and shock – Vibration isolation of machines – Information for the application of source isolation<\/td><\/tr>
EN 12096<\/a><\/td>Mechanical vibration – Declaration and verification of vibration emission values<\/td><\/tr>
EN 12503-4<\/a><\/td>Gymnastic mats – Part 4: Determination of shock absorption<\/td><\/tr>
EN 12786<\/a><\/td>Safety of machinery – Requirements for the drafting of the vibration clauses of safety standards<\/td><\/tr>
EN 13059<\/a><\/td>Safety of industrial trucks – Test methods for measuring vibration<\/td><\/tr>
EN 13490<\/a><\/td>Mechanical vibration – Industrial trucks – Laboratory evaluation and specification of operator seat vibration<\/td><\/tr>
EN 14253<\/a><\/td>Mechanical vibration – Measurement and calculation of occupational exposure to whole-body vibration with reference to health – Practical guidance<\/td><\/tr>
EN 30326<\/a><\/td>Mechanical vibration – Laboratory method for evaluating vehicle seat vibrationPart 1: Basic requirements (ISO 10326-1<\/a>)<\/td><\/tr>
EN 60068-2-64<\/a><\/td>Environmental testing – Part 2-64: Tests – Test Fh: Vibration, broadband random and guidance<\/td><\/tr>
EN 60255-21-3<\/a><\/td>Electrical relays (IEC 60255)Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment; section 3: Seismic tests<\/td><\/tr>
EN 60512-6-4EN 60512-6-5<\/a><\/td>EN 60512-6-4\u25b9 Connectors for electronic equipment – Tests and measurements (IEC 60512)Part 6-4: Dynamic stress tests; Test 6d: Vibration (sinusoidal)Part5: Test 6e: Vibration, noise (DIN EN 60512)<\/td><\/tr>
EN 60745<\/a><\/td>Hand-held motor-operated electric tools – SafetyPart 1: General requirements (IEC 60745-1:2006, modified)Part 2-1: Particular requirements for drills and impact drillsPart 2-2: Particular requirements for screwdrivers and impact wrenchesPart 2-3: Particular requirements for grinders, polishers and disk-type sandersPart 2-4: Particular requirements for sanders and polishers other than disk typePart 2-5: Particular requirements for circular sawsPart 2-6: Particular requirements for hammersPart 2-8: Particular requirements for shears and nibblersPart 2-9: Particular requirements for tappersPart 2-11: Particular requirements for reciprocating saws (jig and sabre saws)Particular requirements for concrete vibratorsPart 2-13: Particular requirements for chain sawsPart 2-14: Particular requirements for planersPart 2-15: Particular requirements for hedge trimmersPart 2-17: Particular requirements for routers and trimmersPart 2-18: Particular requirements for strapping toolsPart 2-19: Particular requirements for jointersPart 2-20: Particular requirements for band sawsPart 2-21: Particular requirements for hand-held drain cleaners<\/td><\/tr>
EN 60994<\/a><\/td>Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) (IEC 60994<\/a>)<\/td><\/tr>
EN 61373<\/a><\/td>Railway applications – Rolling stock equipment – Shock and vibration tests (IEC 61373:2010)<\/td><\/tr>
ENV 25349<\/td>Mechanical vibration – Guidelines for the measurement and the assessmentof human exposure to hand-transmitted vibration (ISO 5349<\/a>)<\/td><\/tr>
DIN ENV 28041<\/a><\/td>Human response to vibration – Measuring instrumentation (DIN EN ISO 8041<\/a>)<\/td><\/tr>
GB 10068-2000<\/a><\/td>Mechanical vibration of certain machines with shaft heights 56 mm and higher–Measurement,evaluation and limits of vibration<\/td><\/tr>
GB 10070<\/a><\/td>Standard of environmental vibration in urban area<\/td><\/tr>
GB 10434<\/a><\/td>Hygienic standard for hand-transmitted vibration in the work environment<\/td><\/tr>
GB 4869<\/a><\/td>Diagnostic criteria and principles of management of occupational vibration disease<\/td><\/tr>
GB\/T 10071<\/a><\/td>Measurement method of environmental vibration of urban area<\/td><\/tr>
GB\/T 10084<\/a><\/td>Vibration and shock–methods for analysis and presentation of data<\/td><\/tr>
GB\/T 10283<\/a><\/td>Portable pneumatic extinguishers–Measurement of hand-transmitted vibration<\/td><\/tr>
GB\/T 10397<\/a><\/td>Small and medium power engines-Evaluation of vibration<\/td><\/tr>
GB\/T 10593.3<\/a><\/td>Methods of measuring environmental parameters for electric and electronic products–Treatment and induction for the vibration data<\/td><\/tr>
GB\/T 10895<\/a><\/td>Centrifuge and separator-Measurement method of mechanical vibration<\/td><\/tr>
GB\/T 10910<\/a><\/td>Agricultural wheeled tractors and fieled machinery-Measurement of whole-body vibration of the operator<\/td><\/tr>
GB\/T 11287<\/a><\/td>Electrical relays–Part 21: Vibration,shock,bump and seismic tests on measuring relays and protection equipment<\/td><\/tr>
GB\/T 11348.1GB\/T 11348.2GB\/T 11348.3GB\/T 11348.4GB\/T 11348.5<\/a><\/td>Mechanical vibration of non-reciprocating machines–Measurements on rotating shafts and evaluation criteriaPart 1: General guidelinesPart 2: Large land-based steam turbine generator setsPart 3: Coupled industrial machinesPart 4: Gas turbine setsPart 5: Machine sets in hydraulic power generating and pumping plants<\/td><\/tr>
GB\/T 11706<\/a><\/td>Measurement method of vibration for marine engine room auxiliaries<\/td><\/tr>
GB\/T 13364<\/a><\/td>Measurement of mechanical vibration for reciprocating pump<\/td><\/tr>
GB\/T 13436<\/a><\/td>Technical requirements for torsional vibration measuring instruments<\/td><\/tr>
GB\/T 13441<\/a><\/td>Specification for measurement of human exposure to whole-body vibration environment<\/td><\/tr>
GB\/T 13442<\/a><\/td>Reduced comfort boundary and evaluation criteria for human exposure to whole-body vibration<\/td><\/tr>
GB\/T 13670<\/a><\/td>Mechanical vibration–Measurement and analysis of vibration to which passengers and crew are exposed in railway vehicles<\/td><\/tr>
GB\/T 13823.1GB\/T 13823.2GB\/T 13823.3GB\/T 13823.4GB\/T 13823.5GB\/T 13823.6GB\/T 13823.7GB\/T 13823.8GB\/T 13823.9GB\/T 13823.10GB\/T 13823.11GB\/T 13823.12GB\/T 13823.13GB\/T 13823.14GB\/T 13823.15GB\/T 13823.16GB\/T 13823.17GB\/T 13823.18<\/a><\/td>Methods for the calibration of vibration and shock pick-upsPart 1: Basic conceptsPart 2: Primary vibration calibration by laser interferometryPart 3: Comparison(secondary vibration)calibration by sinusoidal excitationPart 4: Testing of magnetic field sensitivityPart 5: Testing of mounting torque sensitivityPart 6: Testing of base strain sensitivityPart 7: Primary vibration calibration by comparison of phase anglesPart 8: Testing of transverse vibration sensitivityPart 9: Testing of transverse shock sensitivityPart 10: Methods for the calibration of vibration and shock pick-ups–Secondary shock calibrationPart 11: Primary vibration calibration by laser interferometry at low frequenciesPart 12: Resonance frequency testing of undamped accelerometers on a steel blockPart 13: Primary shock calibration by light cuttingPart 14: Primary calibration by centrifugePart 15: Testing of transient temperature sensitivityPart 16: Testing of temperature response by comparisonPart 17: Testing of acoustic sensitivityPart 18: Primary vibration calibration by reciprocity method<\/td><\/tr>
GB\/T 13824<\/a><\/td>Requirements for instruments for measuring vibration severity<\/td><\/tr>
GB\/T 13860<\/a><\/td>Mechanical vibrations–Land vehicles-Method for reporting measured data<\/td><\/tr>
GB\/T 13866<\/a><\/td>Shock and vibration measurements–Characteristics to be specified for seismic pick-ups<\/td><\/tr>
GB\/T 13876<\/a><\/td>Evaluation criteria of whole body vibration of the operator<\/td><\/tr>
GB\/T 14124<\/a><\/td>Mechanical vibration and shock–Measurement and evaluation of vibration effects on buildings–Guidelines for the use of basic standard methods<\/td><\/tr>
GB\/T 14125<\/a><\/td>Vibration and shock sensitive equipment–Methods of measurement and reporting data of vibration and shock effects in buildings<\/td><\/tr>
GB\/T 14179<\/a><\/td>Brush saws–Measurements of hand-transmitted vibration<\/td><\/tr>
GB\/T 14412<\/a><\/td>Mechanical vibration and shock–Mechanical mounting of accelerometers<\/td><\/tr>
GB\/T 14696<\/a><\/td>Code for the measurement of ship vibration<\/td><\/tr>
GB\/T 14697<\/a><\/td>Code for the measurement of local vibration of ship<\/td><\/tr>
GB\/T 14790<\/a><\/td>Methods for the measurement and the assessment of human exposure to hand-transmitted vibration<\/td><\/tr>
GB\/T 15619<\/a><\/td>Terminology for human exposure to mechanical vibration and shock<\/td><\/tr>
GB\/T 16301<\/a><\/td>Evaluation of vibration severity for marine engine-room auxiliaries<\/td><\/tr>
GB\/T 16440<\/a><\/td>Vibration and shock–Mechanical driving point impedance of the human body<\/td><\/tr>
GB\/T 16441<\/a><\/td>Vibration and shock–Mechanical transmissibility of the human body in the z direction<\/td><\/tr>
GB\/T 16539<\/a><\/td>Determination of sound power levels of noise sources using vibration velocity–Measurement for seal machinery<\/td><\/tr>
GB\/T 16768<\/a><\/td>Metal-cutting machine tools–Measurement method for vibration<\/td><\/tr>
GB\/T 16908<\/a><\/td>Mechanical vibration–Balancing–Shaft and fitment key convention<\/td><\/tr>
GB\/T 17046<\/a><\/td>Vibratory rollers Parts The evaluation to exposure mechanical vibration<\/td><\/tr>
GB\/T 17189<\/a><\/td>Code for field measurement of vibrations and pulsations in hydraulic machines<\/td><\/tr>
GB\/T 17958<\/a><\/td>Requirements for vibration hazards reduction of hand-held machines at the workplace<\/td><\/tr>
GB\/T 18051<\/a><\/td>Tests of electric submersible pump system vibration<\/td><\/tr>
GB\/T 18368<\/a><\/td>Comfort evaluation of human exposure to whole-body vibration in recumbent position<\/td><\/tr>
GB\/T 18703<\/a><\/td>Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand<\/td><\/tr>
GB\/T 18707.1<\/a><\/td>Mechanical vibration–Laboratory method for evaluating vehicle seat vibration–Part 1: Basic requirements<\/td><\/tr>
GB\/T 2298<\/a><\/td>Mechanical vibration and shock-Terminology<\/td><\/tr>
GB\/T 2414.1GB\/T 2414.2<\/a><\/td>Test methods for the properties of piezoelectric ceramicsPart 1: Radial extension vibration mode for diskPart 2: Transverse length extension vibration mode for bar<\/td><\/tr>
GB\/T 2423.10GB\/T 2423.11GB\/T 2423.12GB\/T 2423.14GB\/T 2423.42GB\/T 2423.43GB\/T 2423.47GB\/T 2423.48GB\/T 2423.49<\/a><\/td>Environmental testing for electric and electronic products–Part 2: Test methodsPart 10: Test Fc and guidance: Vibration (Sinusoidal)Part 11: Test Fd: Random vibration wide bandPart 12: Test Fda: Random vibration wide band–Reproducibility highPart 14: Test Fdc: Random vibration wide band–Reproducibility lowPart 42: Combined low temperature\/low air pressure \/ vibration (sinusoidal) testPart 43: Mounting of components, equipment and other articles for dynamic tests including shock(Ea), bump(Eb), vibration(Fc and Fd) and steady-state acceleration(Ca)Part 47: Test Fg: Vibration, acoustically inducedPart 48: Test Ff:Vibration–Time-history methodPart 49: Test Fe: Vibration–sine-beat method<\/td><\/tr>
GB\/T 3389.4GB\/T 3389.5GB\/T 3389.6<\/a><\/td>Test methods for the properties of piezoelectric ceramicsPart 4: Longitudinal length extension vibration mode for rodPart 5: Thickness extension vibration mode for diskPart 6 Thickness-shear vibration mode for rectangular plate:<\/td><\/tr>
GB\/T 4451<\/a><\/td>Methods of vibration (sinusoidal) test for use in industrial process measurement and control instrument<\/td><\/tr>
GB\/T 4857.10<\/a><\/td>Packaging–Transport packages–Sinusoidal vibration test method using a variable vibration frequency<\/td><\/tr>
GB\/T 4857.7<\/a><\/td>Packaging–Transport packages–Sinusoidal vibration test method at constant frequency<\/td><\/tr>
GB\/T 5170.13<\/a><\/td>Inspection methods for basic parameters of environmental testing equipments for electric and electronic products–Mechanical vibrating type machines for vibration (sinusoidal ) test<\/td><\/tr>
GB\/T 5170.15<\/a><\/td>Inspection methods for basic parameters of environmental testing equipments for electric and electronic products–Hydraulic vibrating type machines for vibration<\/td><\/tr>
GB\/T 5395<\/a><\/td>Portable chain saws-Measurement of hand-transmitted vibration<\/td><\/tr>
GB\/T 5913<\/a><\/td>Mechanical vibration of machines and equipments in diesel locomotive Evaluation of vibration severity in site<\/td><\/tr>
GB\/T 6444<\/a><\/td>Mechanical vibration–Balancing vocabulary<\/td><\/tr>
GB\/T 6587.4<\/a><\/td>Vibration tests for electronic measuring instruments<\/td><\/tr>
GB\/T 7031<\/a><\/td>Vehicle vibration–Describing method for road surface irregularity<\/td><\/tr>
GB\/T 7183<\/a><\/td>Evaluation of mechanical vibration severity of machines and equipments in electric locomotives<\/td><\/tr>
GB\/T 7184<\/a><\/td>Measurement method of vibration for small and medium power diesel engines<\/td><\/tr>
GB\/T 7452.1<\/a><\/td>Guidelines for the overall evaluation of vibration in merchant ships<\/td><\/tr>
GB\/T 7452.2<\/a><\/td>Guidelines for the overall evaluation of vibration in merchant ships under 100m<\/td><\/tr>
GB\/T 7453<\/a><\/td>Measurement of ship vibration<\/td><\/tr>
GB\/T 8543<\/a><\/td>Determination of mechanical vibrations of gear units during acceptance testing<\/td><\/tr>
IBM<\/a><\/td>IBM\u00ae<\/sup> Standards Authority for Vibration and Shock, classes of vibration environments<\/td><\/tr>
IEC 60034-14<\/a><\/td>Rotating electrical machinesPart 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher – Measurement, evaluation and limits of vibration severity<\/td><\/tr>
IEC 60255-21<\/a><\/td>Electrical relaysPart 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment; section 3: Seismic tests<\/td><\/tr>
IEC 60512-6-4IEC 60512-6-5<\/a><\/td>Connectors for electronic equipment – Tests and measurement (DIN EN 60255-21-3<\/a>)Part 6-4: Dynamic stress tests; Test 6d: Vibration (sinusoidal)Part5: Test 6e: Vibration, noise (DIN EN 60512)<\/td><\/tr>
IEC 60721-2-6<\/a><\/td>Classification of environmental conditionsPart 2: Environmental conditions appearing in nature. Earthquake vibration and shock<\/td><\/tr>
IEC 60745<\/a><\/td>Hand-held motor-operated electric tools – Safety<\/td><\/tr>
IEC 60749-12<\/a><\/td>Semiconductor devices – Mechanical and climatic test methodsPart 12: Vibration, variable frequency<\/td><\/tr>
IEC 60994<\/a><\/td>Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)<\/td><\/tr>
IEC 61300-2-1<\/a><\/td>Fibre optic interconnecting devices and passive components – Basic test and measurement proceduresPart 2-1: Tests – Vibration (sinusoidal) (DIN IEC 61300-2-1<\/a>)<\/td><\/tr>
IEC 61373<\/td>Railway applications – Rolling stock equipment – Shock and vibration tests (DIN EN 61373<\/a>)<\/td><\/tr>
IEC 61502<\/a><\/td>Nuclear power plants – Pressurized water reactors – Vibration monitoring of internal structures<\/td><\/tr>
IEEE 344<\/a><\/td>IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations<\/td><\/tr>
IEEE 1451.4<\/a><\/td>IEEE Standard for A Smart Transducer Interface for Sensors and Actuators–Mixed-Mode Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats<\/td><\/tr>
ISA-RP37.2<\/td>Guide for Specifications and Tests for Piezoelectric Acceleration Transducers for Aerospace Testing<\/td><\/tr>
ISO 140<\/a><\/td>Acoustics \u2014 Measurement of sound insulation in buildings and of building elements<\/td><\/tr>
ISO 1925<\/a><\/td>Mechanical vibration — Balancing — Vocabulary<\/td><\/tr>
ISO 1940-1<\/a>ISO 1940-2<\/a><\/td>Mechanical vibration – Balance quality requirements for rotors in a constant (rigid) statePart 1: Specification and verification of balance tolerancesPart 2: Balance errors<\/td><\/tr>
ISO 2017<\/a><\/td>Mechanical vibration and shock – Resilient mounting systems<\/td><\/tr>
ISO 2041<\/a><\/td>Mechanical vibration, shock and condition monitoring – Vocabulary<\/td><\/tr>
ISO 2247<\/a><\/td>Packaging – Complete, filled transport packages and unit loads – Vibration tests at fixed low frequenc<\/td><\/tr>
ISO 2371<\/a><\/td>withdrawn<\/td><\/tr>
ISO 2372<\/a><\/td>withdrawn, replaced by ISO 20816-1<\/a><\/td><\/tr>
ISO 2373<\/a><\/td>withdrawn<\/td><\/tr>
ISO 2631-1<\/a>ISO 2631-2<\/a>ISO 2631-4<\/a>ISO 2631-5<\/a><\/td>Mechanical vibration and shock – Evaluation of human exposure to whole-body vibrationPart 1: General requirementsPart 2: Vibration in buildings (1 Hz to 80 Hz)Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systemsPart 5: Method for evaluation of vibration containing multiple shocks<\/td><\/tr>
ISO 2671<\/a><\/td>Environmental tests for aircraft equipmentPart 3.4 : Acoustic vibration<\/td><\/tr>
ISO 2953<\/a><\/td>Mechanical vibration – Rotor balancing – Part 21: Description and evaluation of balancing machines<\/td><\/tr>
ISO 2954<\/a><\/td>Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity<\/td><\/tr>
ISO 4866<\/a><\/td>Mechanical vibration and shock – Vibration of fixed structures – Guidelines for the measurement of vibrations and evaluation of their effects on structures<\/td><\/tr>
ISO 4867<\/a><\/td>Code for the measurement and reporting of shipboard vibration data<\/td><\/tr>
ISO 4868<\/a><\/td>Code for the measurement and reporting of local vibration data of ship structures and equipment<\/td><\/tr>
ISO 5007<\/a><\/td>Agricultural wheeled tractors – Operators seat – Laboratory measurement of transmitted vibration<\/td><\/tr>
ISO 5008<\/a><\/td>Agricultural wheeled tractors and field machinery – Measurement of whole-body vibration of the operator<\/td><\/tr>
ISO 5344<\/a><\/td>Electrodynamic vibration generating systems – Performance characteristics<\/td><\/tr>
ISO 5347-8<\/a>ISO 5347-12<\/a>ISO 5347-13<\/a>ISO 5347-15<\/a>ISO 5347-16<\/a>ISO 5347-18<\/a>ISO 5347-22<\/a><\/td>Methods for the calibration of vibration and shock pick-upsPart 8: Primary calibration by dual centrifugePart 12: Testing of transverse shock sensitivityPart 13: Testing of base strain sensitivityPart 15: Testing of acoustic sensitivityPart 16: Testing of mounting torque sensitivityPart 18: Testing of transient temperature sensitivityPart 22: Accelerometer resonance testing – General methods <\/td><\/tr>
ISO 5348<\/a><\/td>Mechanical vibration and shock – Mechanical mounting of accelerometers<\/td><\/tr>
ISO 5349-1<\/a>ISO 5349-2<\/a><\/td>Mechanical vibration – Measurement and evaluation of human exposure to hand-transmitted vibrationPart 1: General requirementsPart 2: Practical guidance for measurement at the workplace<\/td><\/tr>
ISO 5805<\/a><\/td>Mechanical vibration and shock – Human exposure – Vocabulary<\/td><\/tr>
ISO 5982<\/a><\/td>Mechanical vibration and shock – Range of idealized values to characterize human biodynamic response under whole-body vibration<\/td><\/tr>
ISO 6070<\/a><\/td>Auxiliary tables for vibration generators – Methods of describing equipment characteristics<\/td><\/tr>
ISO 6721<\/a><\/td>Plastics – Determination of dynamic mechanical properties<\/td><\/tr>
ISO 6897<\/a><\/td>Guidelines for the evaluation of the response of occupants of fixed structures, especially buildings and off-shore structures, to low-frequency horizontal motion (0,063 to 1 Hz)<\/td><\/tr>
ISO 6954<\/a><\/td>Mechanical vibration \u2014 Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships (withdrawn, replaced by ISO 20283-5)<\/td><\/tr>
ISO 7096<\/a><\/td>Earth-moving machinery – Laboratory evaluation of operator seat vibration<\/td><\/tr>
ISO 7626-1<\/a>ISO 7626-2<\/a>ISO 7626-5<\/a><\/td>Mechanical vibration and shock – Experimental determination of mechanical mobilityPart 1: Basic terms and definitions, and transducer specificationsPart 2: Measurements using single-point translation excitation with an attached vibration exciterPart 5: Measurements using impact excitation with an exciter which is not attached to the structure<\/td><\/tr>
ISO\/TR 7849<\/a><\/td>Acoustics – Determination of airborne sound power levels emitted by machinery using vibration measurement<\/td><\/tr>
ISO 7919-2<\/a><\/td>Mechanical vibration \u2014 Evaluation of machine vibration by measurements on rotating shaftsPart 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r\/min, 1 800 r\/min, 3 000 r\/min and 3 600 r\/min<\/td><\/tr>
ISO 8002<\/a><\/td>Mechanical vibrations \u2014 Land vehicles \u2014 Method for reporting measured data<\/td><\/tr>
ISO 8041-1<\/a>ISO 8041-2<\/a><\/td>Human response to vibration \u2014 Measuring instrumentationPart 1: General purpose vibration metersPart 2: Personal vibration exposure meters<\/td><\/tr>
ISO 8042<\/a><\/td>Characteristics to be specified for seismic pick-ups<\/td><\/tr>
ISO 8568<\/a><\/td>Mechanical shock – Testing machines – Characteristics and performance<\/td><\/tr>
ISO 8528-9<\/a><\/td>Reciprocating internal combustion engine driven alternating current generating sets – Part 9: Measurement and evaluation of mechanical vibrations<\/td><\/tr>
ISO 8608<\/a><\/td>Mechanical vibration – Road surface profiles – Reporting of measured data<\/td><\/tr>
ISO 8626<\/a><\/td>Servo-hydraulic test equipment for generating vibration – Method of describing characteristics<\/td><\/tr>
ISO 8727<\/a><\/td>Mechanical vibration and shock – Human exposure – Biodynamic coordinate systems<\/td><\/tr>
ISO 9688<\/a><\/td>Mechanical vibration and shock – Analytical methods of assessing shock resistance of mechanical systems – Information exchange between suppliers and users of analyses<\/td><\/tr>
ISO 9996<\/a><\/td>Mechanical vibration and shock – Disturbance to human activity and performance – Classification<\/td><\/tr>
ISO 10055<\/a><\/td>Mechanical vibration – Vibration testing requirements for shipboard equipment and machinery components<\/td><\/tr>
ISO 10068<\/a><\/td>Mechanical vibration and shock – Mechanical impedance of the human hand-arm system at the driving point<\/td><\/tr>
ISO 10326-1<\/a> ISO 10326-2<\/a><\/td>Mechanical vibration – Laboratory method for evaluating vehicle seat vibrationPart 1: Basic requirementsPart 2: Application to railway vehicles<\/td><\/tr>
ISO\/TS 10811-1<\/a>ISO\/TS 10811-2<\/a><\/td>Mechanical vibration and shock \u2014 Vibration and shock in buildings with sensitive equipmentPart 1: Measurement and evaluationPart 2: Classification<\/td><\/tr>
ISO 10813-1<\/a><\/td>Vibration generating machines \u2014 Guidance for selectionPart 1: Equipment for environmental testing<\/td><\/tr>
ISO 10815<\/a><\/td>Mechanical vibration \u2014 Measurement of vibration generated internally in railway tunnels by the passage of trains<\/td><\/tr>
ISO 10816-6<\/a>ISO 10816-7<\/a>ISO 10816-21<\/a><\/td>Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating partsPart 6: Reciprocating machines with power ratings above 100 kWPart 7: Rotodynamic pumps for industrial applications, including measurements on rotating shaftsPart 21: Horizontal axis wind turbines with gearbox<\/td><\/tr>
ISO 10817-1<\/a><\/td>Rotating shaft vibration measuring systemsPart 1: Relative and absolute sensing of radial<\/td><\/tr>
ISO 10819<\/a><\/td>Mechanical vibration and shock – Hand-arm vibration – Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand<\/td><\/tr>
ISO 10846-1<\/a>ISO 10846-2<\/a>ISO 10846-3<\/a>ISO 10846-4<\/a><\/td>Acoustics and vibration \u2014 Laboratory measurement of vibro-acoustic transfer properties of resilient elementsPart 1: Principles and guidelinesPart 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motionPart 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motionPart 4: Dynamic stiffness of elements other than resilient supports for translatory motion<\/td><\/tr>
ISO 13090-1<\/a><\/td>Mechanical vibration and shock \u2014 Guidance on safety aspects of tests and experiments with peoplePart 1: Exposure to whole-body mechanical vibration and repeated shock<\/td><\/tr>
ISO 13091-1<\/a> ISO 13091-2<\/a><\/td>Mechanical vibration – Vibrotactile perception thresholds for the assessment of nerve dysfunctionPart 1: Methods of measurement at the fingertipsPart 2: Analysis and interpretation of measurements at the fingertips<\/td><\/tr>
ISO 13332<\/a><\/td>Reciprocating internal combustion engines – Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet<\/td><\/tr>
ISO 13350<\/a><\/td>Fans \u2014 Performance testing of jet fans<\/td><\/tr>
ISO 13355<\/a><\/td>Packaging \u2014 Complete, filled transport packages and unit loads \u2014 Vertical random vibration test<\/td><\/tr>
ISO 13373-1<\/a>ISO 13373-2<\/a>ISO 13373-3<\/a>ISO 13373-4<\/a>ISO 13373-5<\/a>ISO 13373-7<\/a>ISO 13373-9<\/a><\/td>Condition monitoring and diagnostics of machines – Vibration condition monitoringPart 1: General guidelinesPart 2: Processing, analysis and presentation of vibration dataPart 3: Guidelines for vibration diagnosisPart 4: Diagnostic techniques for gas and steam turbines with fluid-film bearingsPart 5: Diagnostic techniques for fans and blowersPart 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plantsPart 9: Diagnostic techniques for electric motors<\/td><\/tr>
DIN EN ISO 13753<\/a><\/td>Mechanical vibration and shock – Hand-arm vibration – Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system<\/td><\/tr>
ISO 14694<\/a><\/td>Industrial fans \u2014 Specifications for balance quality and vibration levels<\/td><\/tr>
ISO 14695<\/a><\/td>Industrial fans \u2014 Method of measurement of fan vibration<\/td><\/tr>
ISO 14839-1ISO 14839-2ISO 14839-3ISO 14839-4<\/a>ISO 14839-5<\/a><\/td>Mechanical vibration \u2014 Vibration of rotating machinery equipped with active magnetic bearingsPart 1: VocabularyPart 2: Evaluation of vibrationPart 3: Evaluation of stability marginPart 4: Technical guidelinesPart 5: Touch-down bearings<\/td><\/tr>
ISO 14963<\/a><\/td>Mechanical vibration and shock – Guidelines for dynamic tests and investigations on bridges and viaducts<\/td><\/tr>
ISO 15242-1ISO 15242-2ISO 15242-3ISO15242-4<\/a><\/td>Rolling bearings – Measuring methods for vibrationPart 1: FundamentalsPart 2: Radial ball bearings with cylindrical bore and outside surfacePart 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surfacePart 4: Radial cylindrical roller bearings with cylindrical bore and outside surface<\/td><\/tr>
ISO 15243<\/a><\/td>Rolling bearings – Damage and failures – Terms, characteristics and causes<\/td><\/tr>
ISO\/TS 15694<\/a><\/td>Mechanical vibration and shock \u2014 Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system<\/td><\/tr>
ISO 16063-1<\/a>ISO 16063-11<\/a>ISO 16063-12<\/a>ISO 16063-13<\/a>ISO 16063-15<\/a>ISO 16063-16<\/a>ISO 16063-17<\/a>ISO 16063-21<\/a>ISO 16063-22<\/a>ISO 16063-31<\/a>ISO 16063-32<\/a>ISO 16063-33<\/a>ISO 16063-34<\/a>ISO 16063-41<\/a>ISO 16063-42<\/a>ISO 16063-43<\/a>ISO 16063-44<\/a>ISO 16063-45<\/a><\/td>Methods for the calibration of vibration and shock transducersPart 1: Basic conceptsPart 11: Primary vibration calibration by laser interferometryPart 12: Primary vibration calibration by the reciprocity methodPart 13: Primary shock calibration using laser interferometryPart 15: Primary angular vibration calibration by laser interferometryPart 16: Calibration by Earth’s gravitationPart 17: Primary calibration by centrifugePart 21: Vibration calibration by comparison to a reference transducerPart 22: Shock calibration by comparison to a reference transducerPart 31: Testing of transverse vibration sensitivityPart 32: Resonance testing – Testing the frequency and the phase response of accelerometers by means of shock excitationPart 33: Testing of magnetic field sensitivityPart 34: Testing of sensitivity at fixed temperaturesPart 41: Calibration of laser vibrometersPart 42: Calibration of seismometers with high accuracy using acceleration of gravityPart 43: Calibration of accelerometers by model-based parameter identificationPart 44: Calibration of field vibration calibratorsPart 45: In-situ calibration of transducers with built in calibration coil<\/td><\/tr>
ISO 18431-1<\/a>ISO 18431-2<\/a>ISO 18431-3<\/a>ISO 18431-4<\/a><\/td>Mechanical vibration and shock – Signal processingPart 1: General introductionPart 2: Time domain windows for Fourier Transform analysisPart 3: Methods of time-frequency analysisPart 4: Shock-response spectrum analysis<\/td><\/tr>
ISO 18436-1<\/a>ISO 18436-2<\/a><\/td>Condition monitoring and diagnostics of machine systems – Requirements for certification of personnelPart 1: Sector specific requirements for certification bodies and the certification processPart 2: Vibration condition monitoring and diagnostics<\/td><\/tr>
ISO 18649<\/a><\/td>Mechanical vibration – Evaluation of measurement results from dynamic tests and investigations on bridges<\/td><\/tr>
ISO\/TR 19664<\/a><\/td>Human response to vibration – Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety<\/td><\/tr>
ISO 20283-2<\/a>ISO 20283-3<\/a>ISO 20283-4<\/a>ISO 20283-5<\/a><\/td>Mechanical vibration – Measurement of vibration on ships Part 2: Measurement of structural vibration Part 3: Pre-installation vibration measurement of shipboard equipmentPart 4: Measurement and evaluation of vibration of the ship propulsion machineryPart 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships<\/td><\/tr>
ISO 20643<\/a><\/td>Mechanical vibration – Hand-held and hand-guided machinery – Principles for evaluation of vibration emission<\/td><\/tr>
ISO 20816-1ISO 20816-2<\/a>ISO 20816-3ISO 20816-4ISO 20816-5ISO 20816-8ISO 20816-9<\/a><\/td>Mechanical vibration – Measurement and evaluation of machine vibrationPart 1: General guidelinesPart 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r\/min, 1 800 r\/min, 3 000 r\/min and 3 600 r\/minPart 3: Industrial machinery with a power rating above 15 kW and operating speeds between 120 r\/min and 30 000 r\/minPart 4: Gas turbines in excess of 3 MW, with fluid-film bearingsPart 5: Machine sets in hydraulic power generating and pump-storage plantsPart 8: Reciprocating compressor systemsPart 9: Gear units<\/td><\/tr>
ISO 22867<\/a><\/td>Forestry and gardening machinery – Vibration test code for portable hand-held machines with internal combustion engine – Vibration at the handles<\/td><\/tr>
JIS B 0906<\/a><\/td>Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – General guidelines<\/td><\/tr>
JIS B 0907<\/a><\/td>Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity<\/td><\/tr>
JIS B 0910<\/a><\/td>Mechanical vibration of non-reciprocating machines – Measurements on rotating shafts and evaluation criteria<\/td><\/tr>
JIS B 0911<\/a><\/td>Mechanical vibration – Susceptibility and sensitivity of machines to unbalance<\/td><\/tr>
JIS B 1754<\/a><\/td>Acceptance code for gearsPart 2: Determination of mechanical vibrations of gear units during acceptance testing<\/td><\/tr>
JIS C 1510<\/a><\/td>Vibration level meters<\/td><\/tr>
JIS C 1512<\/a><\/td>Level recorders for recording sound level and\/or vibration level<\/td><\/tr>
JIS D 1601<\/a><\/td>Vibration testing methods for automobile parts<\/td><\/tr>
JIS E 3014<\/a><\/td>Parts for railway signal – Vibration test methods<\/td><\/tr>
JIS E 4023<\/a><\/td>Vibration characteristics of railway rolling stock – Measuring methods<\/td><\/tr>
JIS E 4031<\/a><\/td>Railway rolling stock parts – Test methods for vibration<\/td><\/tr>
JIS Z 0232<\/a><\/td>Packaged freights – Method of vibration test<\/td><\/tr>
JIS Z 8735<\/a><\/td>Methods of measurement for vibration level<\/td><\/tr>
MIL-A-8870C<\/a><\/td>Airplane Strength and Rigidity Vibration, Flutter, and Divergence<\/td><\/tr>
MIL-STD-167<\/a><\/td>Mechanical Vibrations On Ship Board Systems<\/td><\/tr>
MIL-STD-167\/1<\/a><\/td>Mechanical Vibrations of Shipboard Equipment (Type I – Environmental and Type II – Internally Excited)<\/td><\/tr>
MIL-STD-167\/2<\/a><\/td>MIL-STD-167\/2 Mechanical Vibrations of Shipboard Equipment (Reciprocating Machinery and Propulsion System and Shafting) Types III, IV, and V<\/td><\/tr>
MIL-STD-202G<\/a><\/td>Test Method 201A: Vibration<\/td><\/tr>
MIL-STD-202G<\/a><\/td>Test Method 204D: Vibration, High Frequency<\/td><\/tr>
MIL-STD-202G<\/a><\/td>Test Method 214A: Random Vibration<\/td><\/tr>
MIL-STD-810F<\/a><\/td>Test Method Standard For Environmental Engineering<\/td><\/tr>
NEMA MG1<\/a><\/td>Assists users in the proper selection and application of motors and generators.<\/td><\/tr>
PD 6585-2<\/a><\/td>Hand-arm vibration. Guidelines for vibration hazards reduction. Management measures at the workplace<\/td><\/tr>
SN 640312a<\/a><\/td>Effects of vibrations on buildings<\/td><\/tr>
UIC 513<\/a><\/td>Guidelines for evaluating passenger comfort in relation to vibration in railway vehicles<\/td><\/tr>
UNI 9916<\/a><\/td>Criteria for the measurements of vibrations and the assessment of their effects on buildings<\/td><\/tr>
UNI 9942<\/a><\/td>Methods for measurement of vibrations generated internally of railways tunnels<\/td><\/tr>
VDI 2038-1VDI 2038-2VDI 2038-3<\/a><\/td>Serviceability of structures under dynamic loads – Methods of analysis and evaluation in structural dynamicsPart 1: Basics, methods, procedures and loadsPart 2: Shock and vibration – prognosis, measurement, evaluation and reduction measuresPart 3: Secondary airborne sound – prognosis, measurement, evaluation and reduction measures<\/td><\/tr>
VDI 2057-1VDI 2057-2VDI 2057-3<\/a><\/td>Human exposure to mechanical vibrationsPart 1: Whole-body vibrationPart 2: Hand-arm vibrationPart 3: Whole-body vibration at workplaces in buildings<\/td><\/tr>
VDI 2062-1VDI 2062-2<\/a><\/td>Vibration insulationPart 1: Terms and methodsPart 2: Insulation elements<\/td><\/tr>
VDI 2064<\/a><\/td>Active vibration isolation<\/td><\/tr>
VDI 2149<\/a><\/td>Transmission dynamics – Elastic mechanisms<\/td><\/tr>
VDI 3831<\/a><\/td>Protective measures against vibration effects on man<\/td><\/tr>
VDI 3832<\/a><\/td>Measurement of structure-borne sound of rolling element bearings in machines and plants for evaluation of condition<\/td><\/tr>
VDI 3833-1VDI 3833-2<\/a><\/td>Dynamic damper and dynamic vibration absorberPart 1: Dynamic damper – Fundamentals, characteristics, implementation, applicationPart 2: Dynamic vibration absorber and dynamic vibration absorption<\/td><\/tr>
VDI 3834-1<\/a>VDI 3834-2<\/a><\/td>Measurement and evaluation of the mechanical vibration of wind turbines and their components Part 1: Wind turbines with gearboxPart 2: Wind turbines without gearbox<\/td><\/tr>
VDI 3836<\/a><\/td>Measurement and evaluation of mechanical vibration of screw-type compressors and Root blowers<\/td><\/tr>
VDI 3837<\/a><\/td>Ground-borne vibration in the vicinity of at-grade rail systems – Spectral prediction method<\/td><\/tr>
VDI 3838<\/a><\/td>Measurement and evaluation of mechanical vibration of reciprocating piston engines and piston compressors with power ratings above 100 kW<\/td><\/tr>
VDI 3839-1VDI 3839-2VDI 3839-4VDI 3839-5VDI 3839-6VDI 3839-7VDI 3839-8<\/a><\/td>Instructions on measuring and interpreting the vibrations of machinesPart 1: General principlesPart 2: Vibration patterns for excitation arising from unbalance, incorrect assembly, bearing faults and damage to rotating componentsPart 4: Typical vibration patterns with fans and blowers for gasesPart 5: Typical vibration patterns with electrical machinesPart 6: Typical vibration patterns with machine sets in hydraulic power stationsPart 7: Typical vibration patterns with centrifugal pumpsPart 8: Typical vibration patterns with reciprocating machines<\/td><\/tr>
VDI 3840<\/a><\/td>Vibration analysis for machine sets<\/td><\/tr>
VDI 3842<\/a><\/td>Vibrations in piping systems<\/td><\/tr><\/tbody><\/table><\/figure>","protected":false},"excerpt":{"rendered":"

The following list shows you a compilation of standards related to vibration measurement. Notice: DIN ISO and DIN EN ISO is found under ISO Number \/ Source Title ANSI S2.1 Vibration and Shock – Vocabulary ANSI S2.2 Methods for the Calibration of Shock and Vibration Pickups ANSI S2.4 Method for Specifying the Characteristics of Auxiliary […]<\/p>\n","protected":false},"author":4,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[97,99],"tags":[],"class_list":["post-6056","post","type-post","status-publish","format-standard","hentry","category-service-en","category-theory-and-standards"],"acf":[],"_links":{"self":[{"href":"https:\/\/mmf.de\/en\/wp-json\/wp\/v2\/posts\/6056","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/mmf.de\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/mmf.de\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/mmf.de\/en\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/mmf.de\/en\/wp-json\/wp\/v2\/comments?post=6056"}],"version-history":[{"count":0,"href":"https:\/\/mmf.de\/en\/wp-json\/wp\/v2\/posts\/6056\/revisions"}],"wp:attachment":[{"href":"https:\/\/mmf.de\/en\/wp-json\/wp\/v2\/media?parent=6056"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/mmf.de\/en\/wp-json\/wp\/v2\/categories?post=6056"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/mmf.de\/en\/wp-json\/wp\/v2\/tags?post=6056"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}